VS-GSWG

Home

Company History

News

Operators

Accessories

Custom Designs

Safety Information

Links

Contact Us

Downloads

{Editable region}

MODEL VS-GSWG SWING GATE OPERATOR

Cabinet:

Weather-resistant galvannealed steel cabinet with powder coat finish
Lockable, gasketed, hinged and removable front cover for easy access

Mechanical:

Heavy-duty 60:1 right-angle C-face gear reducer
Adjustable torque limiter
Linear drive arm
Heavy-duty pillow-block bearings

Mounting:

3 - 3 1/2" OD post mounting
Optional pad mounting pedestal available

Anti-Entrapment/Detection Devices:

Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes

Manual Release:

Manual release is located inside the operator enclosure

Electrical:

Variable speed - soft start/soft stop programmable through an inverter motor control (voltage & phase of input power supply required at time of order)
Available from 1/2 to 2 HP industrial continuous-duty, three-phase, 56-frame motor
Available in all standard voltages and phases
Run timer for clutch and motor protection
Delay on reverse
Master/Slave capability built in
Easily convertible right hand/left hand
Solid state control circuit
Double C-face brake
Power on/off switch
Duplex receptacle on 115 VAC units
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable rotary limit switches
Full system capable for access controls and reversing devices

Warning Signals:

Warning beeper to sound when gate is moving

Description:
The Linear/OSCO Model VS-GSWG is a heavy-duty variable speed swing gate operator designed for smooth, secure and reliable operation of large, heavy swing gates. The positive locking linear drive arm design provides enhanced security, plus increased ability to withstand high wind loads - especially important for large, heavy gates. The VS-GSWG features the same proven and reliable UL325/UL991 compliant solid state control circuitry as the rest of the Linear/OSCO family of gate operators and is available in 1/2, 1 or 2 HP, 115V-460V single- or three-phase power. The VS-GSWG utilizes an inherent current sensing system for entrapment protection and is listed for use in UL class I-IV applications.

VS-GSWG SERIES SWING GATE OPERATOR SPECIFICATIONS
Model	HP	Voltage-Single Phase (Voltage-Three Phase)	Drive Type	Maximum Gate Length	Maximum Gate Weight	Gate Speed	Shipping Weight
VS-GSWG-2	1/2	115/230V (208/230/460V)	linear	20'	1000 lbs	18-22"/sec	295 lbs
VS-GSWG-1	1	115/230V (208/230/460V)	linear	32'	1200 lbs	18-22"/sec	295 lbs
VS-GSWG-7	2	115/230V (208/230/460V)	linear	36'	1500 lbs	18-22"/sec	300 lbs

Double Gate with Two Units

Single Unit Arrangement

Width: 24 " / Height: 30" / Depth: 10"

Caution: Automatic gates are not for pedestrians! Automatic gate operators are designed for vehicular traffic only. They are powerful and can cause serious injury or death. Accordingly, direct all pedestrian traffic to a separate pedestrian gate. UL325 requires the use of contact or non-contact anti-entrapment devices.