SW Series

All SW Series operators utilize a common UL325/UL991 compliant 24VDC control board
Fully featured board for complete access control, security and entrapment protection

Gear reducer and pillow block bearing provides smooth, reliable and quiet power transmission
High starting torque - heavy duty PSC motors

Exterior reset button
Power on/off button
Accessory power outlet on 115V operators
3-button station
Master/slave compatible - LH/RH selectable
Easily accessible control box and limit switches
Quick disconnect crank assembly
Electrical/power disconnect
Accepts all accessories
Footprint 18.31" x 22.64"

Caution: Automatic gates are not for pedestrians! Automatic gate operators are designed for vehicular traffic only. They are powerful and can cause serious injury or death. Accordingly, direct all pedestrian traffic to a separate pedestrian gate. UL325 requires the use of contact or non-contact anti-entrapment devices.

Inherent entrapment sensing system featuring dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual prestart and run alarm
AC and DC power available for access control accessories
Integrated maximum run and auto close timer (0-124 sec)
Built-in master/slave capability using 3-wire shielded cable

SW Series Swing Gate Operator Specifications
Model	HP	Voltage (Single Phase)	Drive Type	Maximum Gate Length	Maximum Gate Weight	Seconds to Open	Maximum Cycles
SWC-2	1/2	115 or 230V	crank	17'	600 lbs	11-14	continuous duty
SWC-1	1	115 or 230V	crank	19'	1000 lbs	11-14	continuous duty
SWD-211	1/2	115V/24VDC solar optional	crank	18'	700 lbs	11-14	30/hour
SWR-211	1/2	115V	crank	15'	500 lbs	11-14	150/day
SWR-221	1/2	230V	crank	15'	500 lbs	11-14	150/day

Heavy duty zinc plated steel chassis
Sleek and sturdy UV-stabilized polyethylene cover
Universal pad mount standard - optional post mount kit available

Full DC powered operator with built in battery backup
Continuous duty 1/2 HP DC permanent magnet motor
Powered by 115V or 24VDC supply
Seamless transition to battery backup mode when AC power fails
Selectable fail-safe or fail-secure modes of operation
Solar power capable