SW
SERIES SWING GATE OPERATORS
WITH NEW APeX CONTROLS
WITH NEW APeX CONTROLS
SWC
Commercial
- 1/2 or 1 HP continuous-duty PSC motor
- 115 VAC or 230 VAC single phase
SWD
Commercial/Residential
- DC-powered battery back-up with advanced soft start/soft stop motor control
- Full-time 1/2 HP DC motor
- Selectable fail-safe or fail-secure modes of operation
- Solar power capable
SWR
Residential
- 1/2 HP PSC motor
- 115 VAC or 230 VAC single phase
Common
Features
- Crank style
- Black UV stabilized polyethylene cover
- Pad mount standard; post mount optional
- Exterior reset button
- UL325/UL991 compliant APeX controller
- Fully integrated radio receiver
|
SW
SERIES SWING GATE OPERATOR SPECIFICATIONS
|
||||||||
|
Model
|
|
HP
|
Voltage
(Single Phase) |
Drive
Type |
Maximum
Gate Length
|
Maximum
Gate Weight
|
Seconds
to Open
|
Maximum
Cycles
|
|
SWC
|
SWC-2 | 1/2 | 115 of 230 V |
crank
|
17'
|
600
lbs
|
11-14
|
continuous duty |
| SWC-1 | 1 | 115 or 230 V |
crank
|
19'
|
1000
lbs
|
11-14
|
continuous duty | |
|
SWD
|
SWD-211 | 1/2 | 115V/24VDC solar optional |
crank
|
18'
|
700
lbs
|
11-14
|
30/hour |
|
SWR
|
SWR-211 | 1/2 | 115V |
crank
|
15'
|
500
lbs
|
11-14
|
150/day |
| SWR-221 | 1/2 | 230V |
crank
|
15'
|
500
lbs
|
11-14
|
15/day | |
1.
Cam Operated Limits
Easily
accessible through access door
2.
APeX Controller
- UL325/UL991 compliant 24 VDC control module
- Full featured for access control, security and entrapment protection
3.
Steel Crank
- Easily removable
- Integrated manual disconnect
Gear
reducer and pillow block bearing for smooth, reliable, quiet power transmission
4.
Heavy-Duty Components
5.
Standard Convience Features
- Exterior reset button
- Power on/off button
- Accessory power outlet on115V machines
- Integrated 3-button station
- Includes APeX Controller with integrated radio receiver, plug-in loop detector capability, surge protection, and easy to read labeling standard
Electrical
- Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
- Continuous tone entrapment alarm with reset button
- Integrated programmable warning beeper during gate movement
- LED diagnostic display for ease of setup and troubleshooting
- Selectable pre-start alarm with provision and ADA compliant visual pre-start and run alarm
- Regulated 24 Volt DC power available for access control accessories
- Integrated maximum run and auto close timer (0-9 minutes)
- Built-in networked dual gate capability using 3-wire shielded cable
Mechanical
- Heavy-duty, zinc-plated, steel chassis
- Right-angle gear reducer
- 1" diameter output shaft
- Optional adjustable torque limiter
- Heavy-duty pillow block bearings
- Universal pad mount standard; optional post mount kit
|
CAUTIONS
|
|