SL
SERIES SLIDE GATE OPERATOR WITH NEW APEX CONTROLS
SLC
Commercial
- 1/2 or 1 HP continuous-duty PSC motor
- 115 VAC or 230 VAC single phase
SLD
Commercial/Residential
- DC-powered battery back-up with advanced soft start/soft stop motor control
- Full-time 1/2 HP DC motor
- Selectable fail-safe or fail-secure modes of operation
- Solar power capable
SLR
Residential
- 1/2 HP PSC motor
- 115 VAC or 230 VAC single phase
Common
Features
- Black UV stabilized polyethylene cover
- Reliable chain drive
- Pad mount standard; post mount optional
- Exterior reset button
- UL325/UL991 compliant APeX controller
- Manual disconnect
- Fully integrated radio receiver
|
SL
SERIES SLIDE GATE OPERATOR SPECIFICATIONS
|
||||||||
|
Model
|
|
HP
|
Voltage
(Single Phase) |
Drive
Type |
Maximum
Gate Length |
Maximum
Gate Weight |
Gate
Speed |
Maximum
Cycles |
|
SLC
|
SLC-2 |
1/2
|
115 or 230 V | #41 chain |
37'
|
1000
lbs
|
11"/sec
|
continuous duty |
| SLC-1 |
1
|
115 or 230 V | #40 chain |
45'
|
2000
lbs
|
11"/sec
|
continuous duty | |
|
SLD
|
SLD-211 |
1/2
|
24 VDC solar optional | #41 chain |
25'
|
700
lbs
|
8"/sec
|
30/hour |
|
SLR
|
SLR-211 |
1/2
|
115 V | #41 chain |
25'
|
500
lbs
|
11"/sec
|
150/day |
| SLR-221 |
1/2
|
230 V | #41 chain |
25'
|
500
lbs
|
11"/sec
|
150/day | |
- Includes APeX controller with integrated radio receiver, plug-in loop detector capability, surge protection, and easy to read labeling standard.
1.
Rotary Mechanicl Limits
Easy
access inside control box
2.
APeX Controls
3.
Manual Disconnect
- UL325/UL991 compliant 24VCD control module
- Full featured for access control, security and entrapment protection
- Simple and secure manual operation during power failure or emercency
Gear
reducer and pillow block bearing for smoth, reliable, quiet power transmission
4.
Heavy-Duty Components
5. Standard Convenience Features
- Exterior reset button
- Power on/off button
- Accessory poer outlet on 115 V machines
- Integrated 3-button station
Electrical
- Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
- Continuous-tone entrapment alarm with reset button
- Integrated programmable warning beeper during gate movement
- LED diagnostic display for ease of setup and troubleshooting
- Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
- Regulated 24 volt DC power available for access control accessories
- Integrated maximum run and auto close timer (0-9 minutes)
- Built-in networked dual gate capability using 3-wire shielded cable
Mechanical
Dimensions
- Heavy-duty, zinc-plated, steel chassis
- Easy-to-operate emergency manual disconnect handle
- 1/2 HP #41 chain
1 HP #40 chain - 31' included - Universal pad mount standard; optional post mount kit
|
CAUTION
 |
|