Caution!
Please Note! Automatic
gates are not for pedestrians! Automatic gate operators are designed for vehicular
traffic only. They are powerful and can cause serious injury or death. Accordingly,
direct all pedestrian traffic to a separate pedestrain gate.
230V, single-phase
operation
Powdercoated stainless
steel cabinet for installations in areas where high concentration of corrosive
material is present
Thermostatically-controlled
strip heater
Arm signal light kit
Options:
Pre-start audio/visual
outputs provided
Warning
Signals:
1/2 HP, 115 VAC, single-phase,
thermally-protected, open-frame, resilient-mount PSC motor
Power on/off switch
Duplex receptacle (115
VAC units only)
Three-button control
station included
Accessory connections
are 24-volt AC or DC
Easily adjustable cam-operated
limit switches
Full system connections
for access controls and reversing devices
Electrical:
Heavy-duty wishbone
style
Available in lengths
from 16 to 25 feet
Constructed of 1x6"
soft wood, painted white with yellow and black warning tape and warning
labels on each side
Includes appropriate
counterweight system
Gate
Arm:
Solid state circuit
board, 24-volt AC or DC
Inherent current sensing
system
15 LEDs for easy setup
and troubleshooting
Built-in maximum run
timer and auto close timer
Master/Slave - simple
three-wire connection
Control
Circuit:
Operator is pre-wired
to accept contact and non-contact detection devices such as reverse edges
and/or photo electric eyes
Heavy-duty harmonic
link with oil impregnated bronze bushings
Mechanical:
Weather-resistant galvannealed
steel cabinet with powder coat finish
Lockable and removable
front access panel for easy access
Cabinet:
The
Model SG barrier gate is designed to control industrial vehicular traffic. The
gate can be actuated by different devices, such as radio controls, single- and
three-button control stations, digital keypads, coded cards, sensing loops and
telephone entry systems.
The Model SG barrier gate can be used for large industrial vehicular traffic.
For high-use applications on wide driveways, it is recommended to use two model
BGU 12, one on each side of the driveway.
The Model SG barrier gate control system is designed to accept most available
entrapment devices and has function switches that will allow for various methods
of control.
