HSLG

Model	HP	Voltage-Single Phase (Voltage-Three Phase)	Drive Type	Maximum Gate Length	Maximum Gate Weight	Gate Speed	Maximum Cycles
HSLG-2	1/2	115/208/230V (208/230/460V)	#40 roller chain	35'	1000 lbs	10"/sec	continuous duty
HSLG-4	3/4	115/208/230V (208/230/460V)	#40 roller chain	45'	1200 lbs	10"/sec	continuous duty
HSLG-1	1	115/208/230V (208/230/460V)	#40 roller chain	55'	1700 lbs	10"/sec	continuous duty

Weather-resistant galvannealed steel cabinet with powder coat finish
Lockable, gasketed, hinged and removable front cover for easy access

#40 roller chain and sprockets
Adjustable torque limiter
Heavy-duty pillow-block bearings
Efficient double V-belt drive

Caution: Automatic gates are not for pedestrians! Automatic gate operators are designed for vehicular traffic only. They are powerful and can cause serious injury or death. Accordingly, direct all pedestrian traffic to a separate pedestrian gate. UL325 requires the use of contact or non-contact anti-entrapment devices. ASTM F2200 requires that all exposed rollers are covered.

Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes.

1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
Magnetic solenoid disc brake
Power on/off switch
Emergency stop/reset button on front cover
Duplex receptacle on 115 VAC units
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable rotary limit switches
Full system capable for access controls and reversing devices

Solid state circuit board, 24 VDC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built in maximum run timer and auto close timer
Right-hand/left-hand easy conversion
Entrapment alarm

Continuous tone entrapment alarm
Warning beeper to sound when gate is moving
Pre-start audio/visual outputs included