• Stainless steel cabinet for installations in areas where high concentration corrosive material is present
• Arm light kit
• Optional solar panels

• 230V, single-phase operation
• Stainless steel cabinet for installations in areas where high concentration of corrosive materials is present
• Thermostatically-controlled strip heater
• Arm light kit

• 10', 12' or 14'
• Constructed of 1"x4" soft wood, painted white with yellow and black warning tape and labels on each side.

• Solid state circuit board, 24 VDC
• Inherent current sensing system
• 15 LEDs for easy setup and troubleshooting
• Built-in maximum run timer and auto close timer
• Master/Slave - simple three-wire connection

• Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes.

• 24 VDC permanent magnet motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Power on/off switch
• Three-button control station included
• Accessory connections are 24 VDC
• Easily adjustable cam-operated limit switches
• Full system capable for access controls and reversing devices

• 1/3 HP, 115 VAC, single-phase, thermally-protected open-frame, resilient-mounted PSC motor
• Power on/off switch
• Duplex receptacle (115 VAC units only)
• Three-button control station included
• Accessory connections are 24-volt AC or DC
• Easily adjustable cam-operated limit switches
• Motor has manually-resettable overload
• Full system capable for access control and reversing devices

Electrical:

• Pre-start audio/visual outputs provided

• Dual V-Belt
• Heavy-duty right-angle oil bath gear reduction
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with cutting bracket

• Weather-resistant galvannealed steel cabinet with powder coat finish

MODEL BGU AND BGU-D
BARRIER GATES

Models BGU and BGU-D barrier gates can be used for parking applications and revenue control.
Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.
The added advantage to the DC operator is the automatic-open feature upon power loss. When the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored (fail safe) OR continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge (fail secure).

• Dual batteries charged by 115 VAC or optional solar panels
• Charging circuit monitors and maintains battery levels, monitors AC availability, automatically switches to batteries when AC is removed, and automatically resumes AC operation
• Control circuit options in absence of AC power:
• Option 1: Fail safe (opens the gate and shuts down until AC power is restored)
• Option 2: Fail secure (continues to cycle gate in normal operation until batteries run down and then cycles open. Resumes cycling when existing batteries are charged or when fresh batteries are installed)